Samsung CLP-550N Setup Manual

Also see for CLP 500: Setup guide Product guide Solution guide Setup guide Service manual

Contents

USING YOUR PRINTER ON A NETWORKE.87 Press the Enter button ( ) to save the selection.8 Press the On Line/Continue button ( ) to return toready mode.Configuring TCP/IPYour printer can be set up on a variety of TCP/IP networks. Thereare several ways in which your printer can be assigned a TCP/IPaddress, depending on your network.• Static Addressing: TCP/IP address is assigned manually bythe system administrator.• Dynamic Addressing BOOTP/DHCP(default): TCP/IP addressis assigned automatically by the server.Static AddressingTo enter the TCP/IP address from your printer’s control panel,take the following steps:1 In ready mode press the Menu button ( ) until you see‘Network’ on the bottom line of the display. Press the Enterbutton ( ) to access the menu.2 Press the Enter button ( ) when ‘Config Network’ displayson the bottom line.3 Press the scroll button ( or ) to display ‘Yes’ and pressthe Enter button ( ).4 Press the Upper Level button ( ), then use the scrollbutton ( ).5 Press the Enter button ( ) when ‘Config TCP’ displays.6 Press the scroll button ( or ) to display ‘Yes’ and pressthe Enter button ( ).7 Press the Upper Level button ( ), then use the scrollbutton ( ).8 Press the Enter button ( ) when ‘IP Get Method’ displays.9 Press the scroll button ( or ) to display ‘Static’ andpress the Enter button ( ).