1452. Using a Network-Connected MachineIPv6 configurationIPv6 is supported properly only in Windows Vista or higher.• Some features and optional goods may not be available depending onmodel or country (see "Features by models" on page 7 or "Menuoverview" on page 25).• If the IPv6 network seems to not be working, set all the network settingto the factory defaults and try again using Clear Setting.The machine supports the following IPv6 addresses for network printing andmanagements.• Link-local Address: Self-configured local IPv6 address (Address starts withFE80).• Stateless Address: Automatically configured IPv6 address by a networkrouter.• Stateful Address: IPv6 address configured by a DHCPv6 server.• Manual Address: Manually configured IPv6 address by a user.In the IPv6 network environment, follow the next procedure to use the IPv6address.10From the control panelActivating IPv61 Press the (Menu) button on the control panel.2 Press Network > TCP/IP (IPv6) > IPv6 Activate.3 Select On and press OK.4 Turn the machine off and turn it on again.When you install the printer driver, do not configure both IPv4 andIPv6. We recommend to configure either IPv4 or IPv6 (see "Installingdriver over the network" on page 137).DHCPv6 address configurationIf you have a DHCPv6 server on your network, you can set one of the followingoptions for default dynamic host configuration.1 Press the (Menu) button on the control panel.2 Press Network > TCP/IP (IPv6) > DHCPv6 Config.
