Media and tray382. Menu Overview and Basic Setup• To avoid fading, do not expose printed transparencies to prolongedsunlight.• Ensure that transparencies are not wrinkled, curled, or have any torn edges.• Do not use transparencies that separate from the backing sheet.• To prevent transparencies from sticking to each other, do not let the printedsheets stack up as they are being printed out.• Recommended media: Transparency for a color laser printer by Xerox, suchas 3R 91331(A4), 3R 2780 (Letter).LabelsTo avoid damaging the machine, use only labels designed for use in laserprinters.• When selecting labels, consider the following factors:- Adhesives: Should be stable at your machine’s fusing temperatureabout 170°C (338°F).- Arrangement: Only use labels with no exposed backing between them.Labels can peel off sheets that have spaces between the labels, causingserious jams.- Curl: Must lie flat with no more than 13 mm of curl in any direction.- Condition: Do not use labels with wrinkles, bubbles, or otherindications of separation.CLP-41xN Series/CLP-41xNW Series CLP-68xND Series/ CLP-68xDW Series
