Wireless network setup1642. Using a Network-Connected Machine1 Check whether or not the network cable is connected to the machine. Ifnot, connect the machine with a standard network cable.2 Start a web browser such as Internet Explorer, Safari, or Firefox and enteryour machine’s new IP address in the browser window.For example,3 Click Login on the upper right of the SyncThru™ Web Service website.4 Type in the ID and Password then click Login. We recommend you tochange the default password for security reasons.• ID: admin• Password: sec000005 When the SyncThru™ Web Service window opens, click NetworkSettings.6 Click Wireless > Wizard.Wizard will help you setup the wireless network configuration. However, ifyou want to set the wireless network directly, select Custom.7 Select the one Network Name(SSID) in the list.• SSID: SSID (Service Set Identifier) is a name that identifies a wirelessnetwork, access points, and wireless devices attempting to connectto a specific wireless network must use the same SSID. The SSID iscase sensitive.• Operation Mode: Operation Mode refers to the type of wirelessconnections (see "Wireless network name and network key" on page148).- Ad-hoc: Allows wireless devices to communicate directly witheach other in a peer-to-peer environment.- Infrastructure: Allows wireless devices to communicate witheach other through an access point.If your network’s Operation Mode is Infrastructure, select the SSID of theaccess point. If the Operation Mode is Ad-hoc, select the machine’s SSID.Note that “portthru” is the default SSID of your machine.8 Click Next.If the wireless security setting window appears, enter the registeredpassword (network password) and click Next.9 The confirmation window appears, please check your wireless setup. Ifthe setup is right, click Apply.
