Installing Printer Software in Windows12• After connecting the printer, click Next.• If you don’t want to connect the printer at this time, clickNext, and No on the following screen. Then the installationwill start and a test page will not be printed at the end of theinstallation.• The reinstallation window that appears in this User’sGuide may differ depending on the printer andinterface in use.5 Select the components you want to reinstall and clickNext.If you installed the printer software for local printingand you select your printer driver name, the windowasking you to print a test page appears. Do as follows:a. To print a test page, select the check box and clickNext.b. If the test page prints out correctly, click Yes.If it doesn’t, click No to reprint it.6 When the reinstallation is done, click Finish.Removing Printer Software1 Start Windows.2 From the Start menu select Programs or All Programs→ your printer driver name → Maintenance.3 Select Remove and click Next.You will see a component list so that you can remove anyitem individually.4 Select the components you want to remove and then clickNext.5 When your computer asks you to confirm your selection,click Yes.The selected driver and all of its components are removedfrom your computer.After the software is removed, click Finish.Installing mono printer driverThis printer features a monochrome only printer. This monodriver limits output to th black toner. You must install the monodriver on your computer. Following steps guide you through thestep by step installation process.1 Make sure that the printer is connected to your computerand powered on. Or your computer and printer areconnected to the network.2 Insert the supplied CD-ROM into your CD-ROM drive. TheCD-ROM should automatically run, and an installationwindow appears.3 Click Cancel.If the confirmation window appears, click Finish.4 Click Start → Printers and Faxes.5 Select Add Printer.6 When Add Printer Wizard appears, click Next.7 Select Local printer attached to this computer, andAutomatically detect and install my Plug and Playprinter, then click Next. Go to step 13.If your computer does not find the printer, then follow thenext step.8 Select Next in the Select a Printer Port window.9 In the Select a Printer Port window, select HaveDisk....10 Click Browse to find a mono driver for your printer.ex) Windows XP 32 bitSelect CD-ROM drive → Printer → PC_MONO →WINXP_2000_VISTA-3211 Select ***.inf file and click Open.12 Click OK in the Install From Disk window.
