70 _MaintenanceReplacing the DADF (or ADF) rubber padYou will need to replace the DADF (or ADF) rubber pad when there seems to bea consistent problem with paper pickup or when its specified yield is reached.For the ADF(CLX-6200FX only)1. Open the ADF cover.2. Rotate the bushing on the right end of the ADF roller toward the ADFand remove the roller from the slot.3. Remove the ADF rubber pad from the ADF, as shown.4. Insert a new ADF rubber pad into place.5. Align the left end of the ADF roller with the slot and push the rightend of the roller into the right slot. Rotate the bushing on the rightend of the roller toward the document input tray.6. Close the ADF cover.For the DADF(CLX-6200ND, CLX-6210FX, CLX-6240FX only)1. Open the DADF cover.2. Remove the DADF rubber pad from the DADF, as shown.3. Insert a new DADF rubber pad into place.4. Close the DADF cover.MANAGING YOUR MACHINE FROM THEWEBSITEIf you have connected your machine to a network and set up TCP/IPnetwork parameters correctly, you can manage the machine via Samsung’sSyncThru™ Web Service, an embedded web server. Use SyncThru™Web Service to:• View the machine’s device information and check its current status.• Change TCP/IP parameters and set up other network parameters.• Change the printer properties.• Set the machine to send email notifications to let you know themachine’s status.• Get support for using the machine.To access SyncThru™ Web Service:1. Start a web browser, such as Internet Explorer, from Windows.2. Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the addressfield and press the Enter key or click Go.Your machine’s embedded website opens.CHECKING THE MACHINE’S SERIAL NUMBERWhen you call for service or register as a user on the Samsung website, themachine’s serial number may be required.You can check the serial number by taking the following steps:1. Press Menu ( ) until System Setup appears on the bottom line of thedisplay and press OK.2. Press the left/right arrow until Maintenance appears and press OK.3. Press the left/right arrow until Serial Number appears and press OK.4. Check your machine’s serial number.5. Press Stop/Clear to return to ready mode.1 Bushing2 ADF roller1 ADF rubber pad1 DADF rubberpad
