Samsung CS29Z40 Owner's Instructions Manual

Also see for CS-29Z40: Owner's instructions Owner's instructions Owner's instructions Owner's instructions Owner's instructions

Contents

English - 2Switching the Television On and OffThe mains lead is attached to the rear of the television1 Plug the mains lead into an appropriate socket.➢ The main voltage is indicated on the rear of thetelevision and the frequency is 50 or 60Hz.2 Press the “21” button (On/Off) on the front of thetelevision.3 Press the POWER button on the remote control to switchthe television on. The programme that you were watchinglast is re-selected automatically. If you have not yet storedany channels, no clear picture appears. Refer to “Channel- Auto Store” on page 3 or “Channel - Manual Store” onpage 4.➢ If the television is initially powered on, several basiccustomer settings proceed automatically.Refer to “Setup - Plug & Play” on page 3.4 To switch the television off, press the “21” button(On/Off) on the front of the television.Placing the Television in Standby ModeThe television can be placed in standby mode, in order toreduce power consumption and wear of the cathode raytube. Standby mode can be useful when you wish to interruptviewing temporarily (during a meal, for example).1 Press the POWER button on the remote control whileviewing.The television is in standby mode.2 To switch the television back on, simply press it again.➢ You can also switch on by pressing the TV ( ),P / P , or numeric button.☛ Do not leave the television in standby mode for longperiods of time (when you are away on holiday, forexample). Turn the television off by pressing the “ ”button (On/Off) on the front (or side) of the television. It isbest to unplug the set from the mains and aerial.4 CH MGRUsed to display channellists on the screen.5 TVUsed to return to theTV mode when it is inexternal input mode.621/21Used to increase ordecrease the volume.7 MENUUsed to display theon-screen menu or returnto the previous menu.8 ▲/▼/◄/►Used to control thecursor in the menu.9 INFOUsed to view the channelinformation and settingstatus you selected.0 S.MODEUsed to select the soundeffect.! P.MODEUsed to select thepicture effect.@ DUAL I-IIUsed to select the soundmode.# TURBOUsed to select the turbosound option.$ SOURCEUsed to display all of theavailable video sources.% PRE-CHUsed to switchrepeatedly betweenthe last two channelsdisplayed.^ SLEEPUsed to select apreset time interval forautomatic turn off.& SRSUsed to select the SRSTruSurround XT mode.* P / PUsed to display thenext or previous storedchannel.( EXITUsed to exit from anydisplay or return tonormal viewing.) MUTEUsed to switch the soundoff temporarily. To turnthe sound back on, pressthe MUTE,21, or21button.a ENTERWhile using theon-screen menus, pressthe ENTER button toactivate (or change) aparticular item.b STILLUsed to freeze thecurrent picture.c P.SIZEUsed to change thescreen size.Installing BatteriesRemove the cover. Install two AAA sizebatteries, then replace the cover.When the remote control does not operatenormally, check that the “+” and “–” ends ofthe batteries are inserted correctly or thebatteries are drained.➢ Do not mix battery types, i.e. alkaline and manganese.Remote Control (depending on the model)➢ Operation of remote control may be affected by brightartificial light near to the TV.➢ This is a special remote control for the visually impaired,and has Braille points on the POWER, Channel andVolume buttons.1 POWERUsed to switch the TV onand off.2 Numeric buttonsUsed to select channelsdirectly.3 -/--Used to select a channelnumbered ten or over.Press this button, then“--” symbol is displayed.Enter the two-digitchannel number.AA68-03903A_Eng.indd 2 2007-03-14 ｿﾀﾈﾄ 3:47:46