Samsung CS29Z40 Owner's Instructions Manual

Also see for CS-29Z40: Owner's instructions Owner's instructions Owner's instructions Owner's instructions Owner's instructions

Contents

English - 4Channel - SortThis operation allows you tochange the programme numbersof stored channels.This operation may be necessaryafter using auto store. From : Channel number to be changed. To : New channel number to be identified. Store : Confirmation the exchange of channel numbers.Channel - Manual StoreYou can store channels, includingthose received via cable networks.When storing channels manually,you can choose:– Whether or not to store each ofthe channels found– The programme number of eachstored channel which you wishto identify Programme (Programme number to be assigned to achannel) Colour System: Auto / PAL / SECAM / NTSC4.43 /NTSC3.58 Sound System: B/G / D/K / I / M Channel (When you know the number of the channel tobe stored)➢ You can also select the channel number directly bypressing the numeric buttons (0~9). Search (When you do not know the channel numbers)The tuner scans the frequency range until the first channelor the channel that you selected is received on the screen. Store (When you store the channel and associatedprogramme number)➢ If there is no sound or abnormal sound, re-select thesound standard required.☛ Channel mode P (Programme mode): When completing tuning,the broadcasting stations in your area have beenassigned to position numbers from P00 to P99.You can select a channel by entering the positionnumber in this mode. C (Air channel mode): You can select a channelby entering the assigned number for each airbroadcasting station in this mode. S (Cable channel mode): You can select a channel byentering the assigned number for each cable channelin this mode.Channel - Channel ManagerYou can exclude the channels you havechosen from the channels you scanned.When you scan through the storedchannels, those you have chosen to skipare not displayed.All of the channels that you do notspecifically choose to skip are displayedduring scanning.➢ It can be displayed simply by pressing the CH MGR(Channel Manager) button.Method:▲/▼ : Used to select a channel to be added or erased.ENTER : Used to confirm the channel selected for adding orerasing. Channel - Fine TuneIf the reception is clear, you do nothave to fine-tune the channel, asthis is done automatically duringthe search and store operation.If however the signal is weak ordistorted, you may have to fine-tune the channel manually.Method:◄/►: You can obtain a sharp and clear picture and goodsound quality.▲/▼  ENTER : You can reset the setting.MENU : You can memorise adjusted picture or sound.Channel - LNA (depending on the model)This function is very useful in thesituation that the TV is used inweak signal. LNA amplifies theTV signal in the weak signalarea, but not noise. LNA (Low Noise Amplifier) setting is to be made for eachchannel. If the picture is noisy with the LNA set to On,select Off. Depending on areas, factory mode of LNA will be set upas On or Off.Channel - NameChannel names will be assignedautomatically when channelinformation is broadcast.These names can be changed,allowing you to assign newnames.Method:▲/▼ : Used to select a letter or number.◄/► : Used to move to the previous or next letter.ENTER : Used to confirm the new name.SortFrom : P 1To : P--Store : ?Move Adjust ReturnT VManual StoreProgramme :P 1Colour System : Auto ►Sound System : B/G ►Channel : C--Search : 40 MHzStore : ?Move Adjust ReturnT V Channel ManagerP 1 C 4 1/15Prog.1 C 4 ▲2 C--3 S 14 S 35 S 66 S 87 S10 ▼AddMove EnterPage ReturnFine TuneMoveAdjust Return+2P 2 *ResetChannel▲ MoreFine TuneLNA : OffMove Enter ReturnT VOffOnMove Adjust ReturnT V NameProg. Сh. Name13 C21 А14 C23 -----15 C25 -----16 C26 -----17 C28 -----▼AA68-03903A_Eng.indd 4 2007-03-14 ｿﾀﾈﾄ 3:47:57