English - 3Viewing the Menus1 Press the MENU button.The main menu is displayed on the screen. Its left side hasfive icons: Input, Picture, Sound, Channel, and Setup.2 Press the ▲ or ▼ button to select one of the icons. Pressthe ENTER button to access the icon’s sub-menu.3 Press the ▲ or ▼ button to move to items in the menu.Press the ENTER button to enter items in the menu.4 Press the ▲/▼/◄/► button to change the selected items.Press the MENU button to return to the previous menu.5 Press the EXIT button to exit from the menu.Setup - Plug & PlayWhen the television is initially powered on, several basiccustomer settings proceed automatically and subsequently.The following settings are available.1 If the television is in standbymode, press the POWERbutton on the remote control.The message Start Plug &Play. is displayed.To start Plug & Play, press theENTER button.The Language menu isdisplayed.➢ The Language menu willautomatically appear afterseveral seconds, even if the ENTER button is notpressed.2 Select the appropriatedlanguage by pressing the▲ or ▼ button. Press theENTER button.The Check antenna input. isdisplayed.➢ If any language is not selected, the language menuwill disappear about 30 seconds later.continued...3 Make sure that the antennais connected to the television(refer to page 1).Press the ENTER button.The Area menu is displayed.4 Press the ▲ or ▼ button toselect your country.Press the ENTER button.5 To search the channels, pressthe ENTER button.To stop the search, press theENTER button.When the channel searchinghas finished, the Clock Setmenu is displayed.6 Press the ◄ or ► button tomove to the hour or minute.Set the hour or minute bypressing the ▲ or ▼ button.7 When you have finished,press the MENU button.The Enjoy your watchingis displayed, and then thechannel which has beenstored will be activated.Re-setting the Plug & PlayMethod:MENU ▲/▼ (Setup) ENTER ▲/▼ (Plug & Play) ENTERInput - (depending on the model)Source List / Edit Name Source ListYou can switch betweenviewing signal fromconnected equipment, suchas a VCR, DVD, set-top box,and the TV source (broadcastor cable).➢ You can change the required external source simplyby pressing the SOURCE button on the remotecontrol. It might take a short period of time for picturesto be switched. To return to the TV mode, press theTV button on the remote control. Edit NameYou can give a name to theexternal source.Channel - Auto StoreYou can scan for the frequency ranges available to you (andavailability depends on your country). Automatically allocatedprogramme numbers may not correspond to actual or desiredprogramme numbers. However you can sort numbersmanually and clear any channels you do not wish to watch.Channels are sorted and storedin the order which reflects theirposition in the frequency range(with lowest first and highest last).The programme originally selectedis then displayed.➢ To stop the search before ithas finished, press the ENTERbutton.When finished, the Sort menuis displayed. To sort the storedchannels into the desired numericalorder, refer to “Channel - Sort” on page 4.To exit without sorting, press the EXIT button.Plug & PlayEnter ReturnStart Plug & PlayOKPlug & PlayEnter SkipCheck antenna input.OKAreaMove Enter SkipAsia/W.EuropCIS/E.EuropeChinaHONG KONG/UKAustraliaNZL/IndonesiaSouth AfricaAmericaPlug & PlayEnjoy your watching.OKStopSearchEnter SkipP 1 C - - 87 MHz10%Move Adjust SkipT V Clock SetHour Minute am/pm-- -- amSource ListTVAV1 : ----AV2 : ----AV3/S-Video : ----Component1 : ----Component2 : ----HDMI : ----Move Enter ReturnT VEdit NameAV1 : ----AV2 : ----AV3 : ----S-Video : ----Component1 : ----Component2 : ----HDMI : ----Move Enter ReturnT V----VCRDVDCable STBHD STBSat. STBAV ReceiverStopSearchEnter ReturnP 1 C - - 87 MHz10%Auto StoreArea : Asia/W.Europe ►Search ►Move Enter ReturnT VLanguageMove Enter SkipEnglishFrançaisTürkçeSetupPlug & Play ►Language : EnglishTime ►Blue Screen : On ►Melody : On ►Move Enter ReturnT VAA68-03903A_Eng.indd 3 2007-03-14 ソタネト 3:47:55