Samsung DB32D User Manual
Also see for DB32D: User manualQuick setup guide
                                                                                                                                                                           |
How to set up manually1 Set Network Type to Wireless from the Network Settings page.2 The Network function searches for available wireless networks. When done, it displays a list of theavailable networks.3 In the list of networks, press the u or d button to select a network, and then press the E buttontwice.― If the desired wireless router does not appear, select Refresh to search again.― If the router cannot be found after retrying, select the Stop button.The Add Network button appears.Select Add Network to add a wireless router to connect to.4 If the Enter security key. screen appears, go to step 5. If you select a wireless router that does nothave security, go to step 7.5 If the router has security, enter the Security Key (Security key or PIN).6 When done, use the right arrow button to move the cursor to Next, and then press E. Thenetwork connection screen appears and the verification process starts.7 Select Stop while network connections are being attempted. This will stop the connection.8 Select IP Settings on network connection screen. The IP Settings screen appears.9 Select the field at the top, press E, and then set IP Settings to Enter manually. Repeat the entryprocess for each field in the IP Address.― Setting IP Settings to Enter manually automatically changes DNS Setting to Enter manually.10 When done, select OK at the bottom of the page, and then press E. The network test screenappears and the verification process starts.11 When the connection has been verified, the Your wireless network and Internet connection aresetup and ready to use. message appears.WPS(PBC)How to set up using WPS(PBC)If your router has a WPS(PBC) button, follow these steps.1 Set Network Type to Wireless from the Network Settings page.2 Select WPS(PBC), press E, and then press E again.3 Press the WPS(PBC) button on your router within 2 minutes. Your product automatically acquires allthe network setting values it needs and connects to your network.4 The network connection screen appears, and network setup is done. |
manualsdatabase
Your AI-powered manual search engine