Samsung DB32D User Manual
Also see for DB32D: User manualQuick setup guide
                                                                                                                                                                           |
Standby ControlYou can set the screen standby mode to be applied when an input signal is received.• AutoPower-saving mode will activate if no input signals are detected even though a source device is connected to the display.The message No Signal will appear if no source device is connected.• OffThe message No Signal will appear if no input signals are detected.― The Standby Control option is only enabled when Source is set to PC, DVI or HDMI.― If No Signal is displayed although a source device is connected, check the cable connection.― If No Signal Message is set to Off, the No Signal message does not appear.If this is the case, set No Signal Message to On.• OnPower-saving mode will activate if no input signals are detected.Power ButtonThe power button can be set to either turn on the power or turn on/off the power.• Power on only: Set the power button to turn on the power.• Power on and off: Set the power button to turn on/off the power.Network StandbyThis feature keeps the network power on when the product turns off.• Off / OnPower ControlAuto Power OnPC module powerMax. Power SavingStandby ControlPower ButtonNetwork StandbyOffOnAutoPower on onlyOff- The displayed image may differ depending on the model. |
manualsdatabase
Your AI-powered manual search engine