Samsung DB32D User Manual
Also see for DB32D: User manualQuick setup guide
                                                                                                                                                                           |
Auto Turn OffSetting an Anynet+ Device to turn Off automatically when the product is turned off.• No / Yes― If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product powers off.― May not be enabled depending on the device.Search for DevicesSwitching between Anynet+ Devices1 Press the TOOLS button, select Anynet+ (HDMI-CEC), and then press E.2 Select Device List, and then press the E button.If you cannot find a device you want, select Refresh to refresh the list.3 Select a device, and then press the E button. You can switch to the selected device.― The Device List menu appears only when you set Anynet+ (HDMI-CEC) to On in the System menu.― Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while switching is inprogress.― If you have selected an Anynet+ device by pressing the SOURCE button and then selecting its input source, you cannot usethe Anynet+ function.― Make sure to switch to an Anynet+ device by using the Device List.Anynet+ (HDMI-CEC)Anynet+ (HDMI-CEC)Auto Turn OffSearch for DevicesOffNo- The displayed image may differ depending on the model. |
manualsdatabase
Your AI-powered manual search engine