Samsung DB32D User Manual
Also see for DB32D: User manualQuick setup guide
                                                                                                                                                                           |
Check the followings.Installation issue (PC mode)The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure.Blank spaces are found on all four sides of the screen whenan HDMI or HDMI-DVI cable is connected to the product andPC.The blank spaces found on the screen have nothing to do with the product.Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem, adjust thescreen size in the HDMI or DVI settings for the graphics card.If the graphics card settings menu does not have an option to adjust the screen size, update thegraphics card driver to the latest version.(Please contact the graphics card or computer manufacturer for further details about how to adjustthe screen settings.)PC is shown in Source when a PC is not connected. PC is always shown in Source irrespective of whether or not a PC is connected.Screen issueThe power LED is off. The screen will not switch on. Make sure that the power cord is connected.No Signal is displayed on the screen. Check that the product is connected correctly with a cableCheck that the device connected to the product is powered on.Not Optimum Mode is displayed. This message is displayed when a signal from the graphics card exceeds the product's maximumresolution and frequency.Refer to the Standard Signal Mode Table and set the maximum resolution and frequency according tothe product specifications.The images on the screen look distorted. Check the cable connection to the product |
manualsdatabase
Your AI-powered manual search engine