Samsung DCS Compact II General Description Manual

Also see for DCS COMPACT II: Programming manual Programming manual User guide

DCS Compact II General Description Chapter 4. Features4-13the digit 5. These can be changed but will affect other feature access codes. Alluser guides are written using the default numbering plan.Flexible RingingEach C.O. line can be programmed to ring at any station or station group. Eachline can be assigned a day ring destination and a night ring destination.Hot LineStations can be programmed to call a pre–defined station or station groupwhenever that station goes off–hook. A hot line delay timer of 1–250 secondscan be programmed to allow sufficient time to make a different call.In Group/Out of GroupIndividuals assigned to a station hunt group may temporarily remove theirtelephones from the group by pressing the In/Out of Group button provided thatthere should be someone still in the group. Stations out of a group will notreceive calls to that group but will continue to receive calls to their individualextension numbers. When desired, the user may put him/herself back into thegroup by pressing the button again. Users who do not have this button may dialthe access code and the group desired. A station user is allowed to be in severalgroups if a key and the extender of that group are assigned for each group onthe user's phone.Incoming Call DistributionIncoming calls can be assigned to ring a distributed station hunt group. Thisallows all members of the group to share the call load.Incoming/Outgoing ServiceOutside lines are available for incoming or outgoing service. Programmingallows any outside line to be used for incoming calls only, outgoing calls only orboth–way service.Individual Line Control