Samsung DECT 500 Installation And Programming Manual

Contents

Part 2: DECT Hardware Installation and Programming38Installing and Configuring a SamsungRepeater (WRFP)Although Repeaters look similar for both the500 and the 1500 system, they are not inter-changeable. Do not attempt to use a Repeaterintended for a 500 system on a 1500 system, orvice versa.To install a Samsung Repeater, it is recom-mended you use the instructions in part A. Ifyou do not have access to the Repeater / Hand-set Programming Tool (PN 13821) and a PC, usethe instructions in part B.A.You will need the Repeater / Handset Programming Tool running on a PC connectedto the DECT system and documentation on how to connect the cables.1. Pull the wire from the power supply through the wall holder and then mountthe wall holder on the wall.2. Connect the wire to the plug on the back of the Repeater and "click" theWRFP onto the wall holder.If you need to remove the Repeater, separate it from the wall holder with a gentlepush of a screwdriver.To configure the Repeater, run the Repeater / Handset Programming Tool.