ŝ9ŞConnecting to a Power SourceInserting the memory cardƈ Insert the battery as shown- If the camera does not turn on after youhave inserted battery, please checkwhether the battery is inserted with thecorrect polarity (+ / -).- When the battery chamber cover isopened, do not press the battery chambercover by force. This may cause damageto the battery chamber cover.BatterystatusBatteryindicatorThe battery isfully chargedLow battery capacity(Prepare to rechargeor use spare battery)Low battery capacity(Prepare to rechargeor use spare battery)Low battery capacity(Prepare to rechargeor use spare battery)ƈ There are 4 indicators for battery condition that are displayed on the LCDmonitor.ƈ Insert the memory card as shown.- Turn off the camera’s power beforeinserting the memory card.- Have the front of the memory cardfacing toward the front of the camera(lens) and the card pins toward the backof the camera (LCD monitor).- Do not insert the memory card in the wrongway round. Doing so may damage thememory card slot.Instructions on how to use the memory cardƃ Be sure to format the memory card (see p.54) if you are using a newlypurchased memory for the first time, if it contains data that the camera cannotrecognise, or if it contains images captured with a different camera.ƃ Turn off the camera power whenever the memory card is being inserted or removed.ƃ Repeated use of the memory card will eventually reduce the memory card’sperformance. Should this be the case, you will need to purchase a new memory card.Wear and tear on the memory card is not covered by the Samsung warranty.ƃ The memory card is an electronic precision device.Do not bend, drop or subject the memory card to any heavy impact.ƃ Do not store the memory card in an environment with strong electronic ormagnetic fields, e.g. near loud speakers or TV receivers.ƃ Please do not use or store in an environment where there are extremes in temperature.ƃ Do not allow the memory card to become dirty or to come into contact with anyliquid. Should this happen, clean the memory card with a soft cloth.ƃ Please keep the memory card in its case when not in use.ƃ During and after periods of extended use, you may notice that the memory cardis warm. This is perfectly normal.ƃ Do not use a memory card that is used in another digital camera. To use thememory card in this camera, format the memory card using this camera.ƃ Do not use a memory card formatted by another digital camera or memory card reader.ƃ If the memory card is subjected to any of the following, the recorded data maybecome corrupted :- When the memory card is used incorrectly.- If the power is switched off or the memory card is removed while recording,deleting (formatting) or reading.ƃ Samsung cannot be held responsible for lost data.ƃ It is advisable to copy important data onto other media as back-up e.g. floppydisks, hard disks, CD etc.ƃ If there is insufficient memory available: A [Memory Full!] message will appear and the camera will not operate. Tooptimise the amount of memory in the camera, replace the memory card ordelete unnecessary images stored on the memory card.