ŝ13ŞChanging the recording mode Starting the recording modeƃ Changing the recording mode : If the [FULL] menu was selectedSteps from 1-4 are the same as those for selecting the [MODE] menu.5. The recording mode used just before will display.6. Press the M (Mode) button located on the back of the camera and the modeselection menu will display.7. To select the Auto, Program, Movie clip or Scene modes, press the Left /Right button.To move between the Auto, Manual, Movie clip menu line and Scene menuline, press the Up / Down button.8. Press the M (Mode) button and the mode selection menu will disappear.[Pressing the Up button]Portrait[Pressing the Left button][Mode selection menu]AUTO MOVIE[Selecting the Movie clip mode][Selecting the Scene mode]Confirm:Mode/OK Confirm:Mode/OKConfirm:Mode/OKƈ How to use the Auto modeUse this for shooting basic still images.1. Select the [FULL] sub menu on the [MODE] menu (p.12).2. Select the Auto mode by pressing the M (Mode)button (p.13).3. Point the camera towards the subject andcompose the image by using the LCD monitor.4. Press the shutter button to capture an image.[AUTO mode]ƃIf the auto focus frame turns to red when you press the shutter button downhalf way, it means that the camera cannot focus on the subject. Should thisbe the case, the camera is less likely to capture an image clearly.ƃAvoid obstructing the lens or the flash when you capture an image.INFORMATION