ŝ44ŞStarting the slide showƈ Images can be displayed continuously at pre-set intervals. You can view theslide show by connecting the camera to an external monitor.1. Select the [Show] sub menu by pressing the UP /DOWN button and press the RIGHT button.2. Use the Up / Down buttons to select the desiredsub menu.[Play] selected : The slide show is closedafter one cycle.[Repeat Play] selected : The slide show is repeated until cancelled.3. Press the OK button to start the slide show.- Press the Pause button to pause the slide show.- Press the Pause button ( ) again to resume the slide show.- To stop the slide show, press the play & pause button, and then press theLEFT or RIGHT button.ƃ Setting play interval : Set the slide show play interval.1. Select the [Interval] sub menu by pressing theUP / DOWN button and press the RIGHT button.2. Use the Up / Down buttons to select the desiredinterval.3. Press the OK button to save the configuration.ƃ The loading time depends on the image size and quality.ƃ While the slide show is playing, only the first frame of a MOVIE file isdisplayed.ƃ While the slide show is playing, the voice recording file will not display.INFORMATIONSLIDEShowIntervalEffectBack: Set:OKPlayRepeat PlaySLIDEShowIntervalEffectBack: Set:OK1 sec3 sec5 sec10 secƃ Configure slide show effects : Unique screen effects can be used for the slideshow.1. Select the [Effect] sub menu by pressing theUP / DOWN button and press the RIGHT button.2. Use the Up / Down Button to select the type ofeffect.: Normal display.: Image is displayed slowly.: Image is displayed slowly from the centre outwards.: Image moves from the top left.: The image slides diagonally from top left to bottom right.: The image slides irregularly.3. Press the OK button to confirm the setting.SLIDEShowIntervalEffectBack: Set:OK7..