ŝ66ŞStarting PC modeƈ Connecting the camera to a PCƈ Disconnecting the camera and PC : Refer to page 68(Removing the removable disk).ſ If you selected [Printer] in Step 4, when you connect the camera to yourprinter, the [Connecting Printer] message will display and the connection willnot be established.In this case, disconnect the USB cable, and then follow the procedure fromStep 2 and onward.ƃ To save battery power, it is recommended that you use the cradle (optional)when connecting the camera to a computer.INFORMATIONҮIf you connect the USB cable to a USB port on your PC and then turn on thepower, the camera will automatically switch to "computer connection mode".ҮIn this mode, you can download stored images to your PC through the USBcable.ҮThe LCD monitor is always turned off in PC mode.ƈ Connecting the camera to a PC1. In any mode with the exception of Voice Recordingmode, press the Menu button.2. Press the LEFT / RIGHT button and select the[SETUP] menu tab.3. Select the [USB] menu by pressing the UP /DOWN button and press the RIGHT button.4. Use the UP and DOWN buttons to select[Computer], and then press the OK button.5. Press the menu button twice and the menu willdisappear.6. Connect the PC to the camera with the USB cable.SETUPAF LampSoundUSBLCDVideo OutBack: Set:OKComputerPrinter