64LCD brightnessYou can adjust the LCD brightness.Adjusting LCD Brightness1. Rotate the mode dial to SETUP mode and the [SETUP1/3] menu will display.2. Select the [SETUP 3/3] menu by pressing the LEFT/RIGHT button.3. Select the [LCD] menu by pressing the UP/ DOWN buttonand press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.- [LCD] sub menu : -3~NORMAL~ + 3Selecting Video out typeThe Movie output signal from the camera can be NTSC or PAL. Your choice of output will begoverned by the type of device (monitor or TV, etc.) to which the camera is connected. PALmode can support only BDGHI.Connecting to an external monitorIn RECORDING/ PLAY mode, you canview the stored still images or movie clipsby connecting the camera to an externalmonitor via the A/V cable. When thecamera is connected to an externalmonitor, the LCD monitor will be turnedoff automatically.Yellow color - VideoWhite color - VoiceSETUP 3/3SET:OKBACK:LCDNORMALSETUP 3/3SET:OKBACK:VIDEO OUTNTSCPALSetting the Video Out Type1. Rotate the mode dial to SETUP mode and the [SETUP1/3] menu will display.2. Select the [SETUP 3/3] menu by pressing the LEFT/RIGHT button.3. Select the [VIDEO OUT] menu by pressing the UP/DOWN button and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.- [VIDEO OUT] sub menu : NTSC, PAL