22Starting recording modeRecording a still imageSteps from 1-4 are the same as those for recording a movieclip.5. Select the STILL IMAGE( ) mode by sliding the modeswitch.6. Point the camera towards the subject and compose theimage by using either the viewfinder or LCD monitor.7. Press the shutter button to capture an image.A [DELETE?] message may be displayed after taking apicture. Refer to p.49 for more information about this[DEL. ANSWER].Recording VoiceSteps from 1-4 are the same as those for recording a movieclip.5. Select the VOICE RECORDING( ) mode by slidingthe mode switch.6. Press the shutter button to record a voice.- Press the shutter button once and voice is recorded for aslong as the available recording time(Max : 1 hour) allows.The recording time will be displayed on the LCD monitor.- Voice will still be recorded if the shutter button is released.- If you wish to stop recording, press the shutter button again.- File type : *.wavA distance of 40cm between you and the camera (microphone) is the best distance torecord sound.INFORMATIONManner mode: Pressing the power button for more than 3 seconds changes the buzzerand start-up sound setting to OFF, even though you may have set these to ON.To turn on the startup sound and operation sound, set the startup sound (MyCAMmode) and operation sound (Setup mode) to a submenu other than [OFF].INFORMATION [ STILL IMAGE mode ][ VOICE RECORDING mode ]STANDBYSTART.SHUTTER
