69SoundIf you set the operation sound to ON, various sounds will be activated for camera startup, whenbutton are pressed, and if there is a card error, so that you can be aware of the cameraoperation status.Setting Operation Sounds1. In any mode other than Voice Recording mode, press theMENU button.2. Press the LEFT/ RIGHT button and select the [SETUP]menu tab.3. Select the [SOUND] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.- [SOUND] sub menu : OFF/LOW/MEDIUM/HIGH5. Press the menu button twice and the menu will disappear.Adjusting LCD Brightness1. In any mode other than Voice Recording mode, press theMENU button.2. Press the LEFT/ RIGHT button and select the [SETUP]menu tab.3. Select the [LCD] menu by pressing the UP/ DOWN buttonand press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.- [LCD] sub menu : DARK, NORMAL, BRIGHT5. Press the menu button twice and the menu will disappear.LCD brightnessYou can adjust the LCD brightness.SETUPIMPRINTLAMPSOUNDLOWMEDIUMHIGHBACK: SET:OKSETUPLAMPSOUNDLCDDARKNORMALBRIGHTBACK: SET:OK
