76Start up imageSetting the Startup Sound1. In any mode other than Voice Recording mode, press theMENU button.2. Press the LEFT/ RIGHT button and select the [MYCAM]menu tab.3. Select the [S.SOUND] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.5. Press the menu button twice and the menu will disappear.Shutter soundStart up soundYou can select the shutter sound.Selecting the Shutter Sound1. In any mode other than Voice Recording mode, press theMENU button.2. Press the LEFT/ RIGHT button and select the [MYCAM]menu tab.3. Select the [SH.SOUND] menu by pressing the UP/DOWN button and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.5. Press the menu button twice and the menu will disappear.You can select the sound that is activated whenever the camera is turned on.MyCAMAVATERS.IMAGES.SOUNDSOUND1SOUND2SOUND3BACK: SET:OKMyCAMS.IMAGES.SOUNDSH.SOUNDSOUND1SOUND2SOUND3BACK: SET:OKOnly an image that is saved as a LOGO in the [RESIZE] sub menu can be used as thestart up image.The logo image will not be deleted by the [DEL.ALL] or [FORMAT] menu.INFORMATION
