73Setting up the MYCAM menuYou can set up a start up image, start up sound, shutter sound and AVATAR. Every cameraworking mode (with the exception of Voice recording mode) has the MyCAM menu.AvatarYou can transfer avatar files created with the DigiStudio program to the camera and play themback in Play mode (SUCAxxxx.mov) or use the desired avatar as the startup image(SAVAxxxx.mov).- In order to be able to save an avatar to the camera, the camera driver must be installed onyour PC. For installation instruction, please refer to page 95.- Avatar : The word "avatar" came from ancient Sanskrit and referred to the incarnation of a god thatappears in this world. In computer terms, an avatar is a 3D or 2D graphic representation.Storing Avatars for the Startup Image1. Connect the camera to your PC. (See page 83.)2. Open Windows Explorer, select the folder in which youravatars are located (C:\My Avatar), and then selectavatar(s) for the startup image (SAVAxxxx.mov).3. Right-click on the avatar and select [Copy].4. Select the DCIM \AVATAR folder in the removable drive.5. Right-click on the removable drive and select [Paste] tocopy the avatar(s) to the memory card.Menu tab Main menu Sub menu PageOFFCHANGEOFF IMAGE1IMAGE2 IMAGE3OFF SOUND1SOUND2 SOUND3OFF SOUND1SOUND2 SOUND3AVATARS.IMAGES.SOUNDSH.SOUNDP.74P.75P.76P.76
