4. Enter your current zip code and tap Done. This zip codemust correspond to the location of your desired TV andset top box.5. From the Find your TV service screen, select a serviceprovider from the available channel listing.6. From the Personalize screen, you can either follow theon-screen prompts to personalize your desired contentor tap Skip to continue without customizing yourcontent.7. Read the on-screen Peel Disclaimer agreement and tapAgree to complete the set up process.Customizing Your Remote1. From the top of the main screen, tap (RemoteControl) ➔ Set Up Now.2. From the Select your TV brand screen, tap your TV’smanufacturer name.• If you have a brand of TV not listed or you are using a projector,select from one of the following two options. Choose fromeither Show other brands or I have a home projector.3. Aim your device at the TV and tap (Power) toconfirm the set up process completed successfully andthe correct TV IR codes were selected.Note: The process of the initial TV activation can take up to 10seconds. Please do not press the button again.4. If the TV turned on, tap Yes, this code 1 works.– or –If the TV did not turn on after tapping (Power) andwaiting 10 seconds, tap No, test next code 2 orSend this code 1 again.5. From the Select your channel source screen, select theentry that corresponds to your current channel controlmethod:• Set-top Box: selected when changing channels is done via areceiver box. Channels are not changed via the TV remote butrather through the receiver/box.• My xxx TV: selected when a signal is fed directly into the TVand no box is used. Channels are changed directly on the TV byusing the TV remote and not a box’s remote.Applications 202
