7 Set Up Your DeviceGetting StartedTurn Your Device On or OffThe instructions below explain how to turn yourdevice on or off.Turn the Device OnTo turn the device on:► Press and hold the Power key until the devicevibrates and turns on.Turn the Device OffTo turn the device off:1. Press and hold the Power key until the Deviceoptions menu is displayed.2. Tap Power off, and confirm if prompted.Restart the DeviceIf your device stops responding to taps or fingergestures and you are unable to turn it off, you canrestart your device.► Press and hold the Power key and theVolume down key at the same time formore than seven seconds.Initial Set UpThe first time you turn your device on, a Welcomescreen is displayed. It guides you through the basicsof setting up your device.Follow the prompts to choose a default language,connect to a Wi-Fi® network, set up accounts,choose location services, learn about your device’sfeatures, and more.Setup and TransferDuring initial setup, the Setup & Transfer screendisplays. It guides you through the basics of settingup your device.Follow the prompts to choose a default language,connect to a Wi-Fi network, set up accounts, chooselocation services, learn about your device’s features,and more.Note: If you tap not now > exit, you can set up yourdevice later.To access AT&T Setup & Transfer at any time:► From a Home screen, tap Apps >Setup & Transfer.Secure Your DeviceUse your device’s screen lock features to secureyour device.Lock the DeviceBy default, the device locks automatically when thescreen times out.To lock the device:► Press the Power key.Unlock the DeviceThe default Screen lock on your device is Swipe.Note: To choose a more secure screen lock, seeSet a Screen Lock.To unlock the device:► Press the Power key or Home key, and thendrag your finger across the screen.Set Up Your Device