130 2G. Voice Services Open applications. (See “Opening Menus With VoiceDialer” on page 131.)Calling a Contact With Voice Dialer1. Press and tap > (Voice Dialer).2. When you see “Listening,” say “Call” followed bythe name and the label for the contact you wish tocall. For example, say “Call John Smith Mobile.” Thedevice dials the number stored for the contact“John Smith” with the label “Mobile.” If the location is not recognized or the name doesnot have a phone number stored in Contacts, youwill see an onscreen list of possible options. If a name has only a single number, or if youknow the name but are not sure which number tocall, say “Call” followed by the name only. Forexample, say “Call John.”● If the name is recognized and there is onlyone phone number for the name, your deviceimmediately places the call.● If there are multiple numbers, you will see alist; tap a number to place the call.Calling a Phone Number With Voice Dialer1. Press and tap > (Voice Dialer).2. When you see “Listening,” say “Call” followedimmediately by a valid string of digits to be dialed,for example, say “Call 555 555 5555.”Speak naturally and clearly and remember to speakone digit at a time—1-800 should be pronounced “OneEight Zero Zero.”Tip: Use Voice Dialer in a quiet environment so it canaccurately recognize your commands.SPH-D700.book Page 130 Thursday, December 9, 2010 10:22 AM
