235Scanning for DevicesThis option allows you to scan for active Bluetooth devices soyou can pair with them.1. Press ➔ and then tap Settings ➔ Bluetooth.2. From the bottom of the Bluetooth settings page, tapScan for devices to search for visible externalBluetooth-compatible devices such as headsets,devices, printers, and computers.Important! Some Bluetooth devices are secured and require aPIN number to confirm and pair with them.3. Enter a PIN to pair with the device, if one is required,and tap OK.Data UsageMonitor and mange your device’s data usage capabilities.Features include activation/deactivation or network datausage, set mobile data usage for a set period of time, andview application data usage.1. Press ➔ and then tap Settings ➔ Wirelessand network ➔ Data usage.To activate/deactivate Mobile data usage:1. Press ➔ and then tap Settings ➔ Wirelessand network ➔ Data usage.2. In a single motion touch and slide the Mobile data sliderto the right to turn it on .3. In a single motion touch and slide the Mobile data sliderto the left to turn it off .To set a mobile data limit:1. Press ➔ and then tap Settings ➔ Wirelessand network ➔ Data usage.2. Place a check mark in the Set mobile data limit field.3. Read the on-screen disclaimer info and tap OK.4. Touch and drag the far right ends of the Red or Orangehorizontal lines to manually adjust both the Warningand Maximum data limits.5. Touch and drag the bottom grey vertical lines to adjustthe time frames.6. Tap the Data usage cycle button and select either thecurrent cycle or define your own by selecting Changecycle.OFF ONON OFF