English 2102 ConnectionsConnecting Audio from External ComponentsOPTICAL : Connecting an External Digital ComponentDigital signal components such as a Cable Box/Satellite receiver (Set-Top Box).Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digitalcomponent.Press the FUNCTION button to select D.IN input.The mode switches as follows : BD/DVD D. IN AUX R. IPOD FMNOTETo see video from your Cable Box/Satellite receiver, you must connect it's video output to a TV.This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.This system supports only DTS and Dolby Digital audio, MPEG audio which is bitstream cannot be supported.AUX : Connecting an External Analogue ComponentAnalogue signal components such as a VCR.Connect AUX IN (Audio) on the product to the Audio Out of the external analogue component.Be sure to match connector colours.Press the FUNCTION button to select AUX input.The mode switches as follows : BD/DVD D. IN AUX R. IPOD FMNOTEYou can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks ofthe VCR to this product.1.2.•✎1.•2.•✎FM ANTHDMI OUTDIGITALAUDIO INOPTICALVIDEOAUX INCOMPONENT OUTFM ANTHDMI OUTVIDEOCOMPONENT OUTOptical Cable(not supplied)Audio Cable(not supplied)If the external analoguecomponent has only oneAudio Out, connect eitherleft or right.Set-Top Box VCRWhiteRedOPTICAL AUXHT-D5000_ELS_0221.indd 21HT-D5000_ELS_0221.indd 21 2011-03-14 ¿ÀÈÄ 8:31:492011-03-14 ¿ÀÈÄ 8:31:49
