Samsung HW-D7000 User Manual

Also see for HW-D7000: Firmware upgrade guide User manual

Contents

22 EnglishConnectionsSurround Back Speakers SBL SBRIf you are using two surround center speakers, place them behind the listening position.Place the surround back speaker about 2.3-3.3 feet (70 cm to 1 m).Front Height Speakers FHL FHR (Using Dolby Pro Logic IIz)When using Dolby Pro Logic IIz, place the Surround Back Speakers on the FHL, FHR position above thefront L and front R speakers at least 3.3 feet(1 m) above each one.Speaker ConfigurationFor the best surround-sound experience, you should connect seven speakers and a poweredsubwoofer. The following table shows which channels you should use based on the number ofspeakers you have.2 speakers 3 speakers 4 speakers 5 speakers 6 speakers 7 speakers(DPL IIx)7 speakers(DPL IIz)SBL SBL FHLSBR FHRNOTENo matter how many speakers you use, a powered subwoofer is recommended for powerful and solid bass.If you place a speaker near your TV set, screen color may be distorted because of the magnetic fieldgenerated by the speaker. If this occurs, place the speaker away from your TV set.Attaching the Toroidal Ferrite Core to the Power Cord of the Main UnitIf you attach a Toroidal ferrite core to the power cord, it will help to prevent RF interference fromradio signals.Pull the fixing tab of the Totoidal ferrite core toopen it.Make a loop in the power cord.Attach the Toroidal ferrite core to the power cord asthe figure shows and press it until it clicks.✎1.2.3.HDMI 1(SAT)ARC(MONITOR) (GAME)HDMI 2(AUX1)HDMI 3(AUX2)HDMI 4HDMI INHDMI OUTiPodLANVIDEO IN COMPONENT IN/OUTVIDEO OUTSAT GAME TV 1(SAT)2(GAME)MONITORAUDIO IN IN OUTSAT GAME TV CDYP B/CBPR /CROPTICAL 1(SAT)OPTICAL 2(GAME)OPTICAL 3(TV)COAXIAL(CD)SUBWOOFEROUTFRONT FRONTSURROUND SURROUNDCENTERSPEAKERS OUTSURROUND BACK/FRONT HEIGHTSURROUND BACK/FRONT HEIGHTFM ANTSPEAKER IMPEDANCE : 4~8