Samsung HW-D7000 User Manual

Also see for HW-D7000: Firmware upgrade guide User manual

Contents

48 EnglishSetupTo view your Network Settings values on mostWindows computers, follow these steps:Right click the Network icon on the bottomright of the Windows desktop.In the pop-up menu, click Status.On the dialog that appears, click the Supporttab.On the Support tab, click the Details button.The Network settings are displayed.To enter the Network settings into your product,follow these steps:Press the ▲▼ buttons to select Wired, andthen press the ENTER button.Press the ◄► buttons to select IP Settings,and then press the ENTER button.SettingsDisplayAudioNetworkSystemLanguageSecurityGeneralSupportIP Settingsm Move Number " Enter ' ReturnIP Mode ManualIP Address 0 . 0 . 0 . 0Subnet Mask 0 . 0 . 0 . 0Gateway 0 . 0 . 0 . 0DNS Mode ManualDNS Server 0 . 0 . 0 . 0OKPress the ENTER button to select IP Mode.Press the ▲▼ buttons to select Manual,and then press the ENTER button.Press the ▼ button to go to the first entryfield (IP Address).Use the number buttons on your remote toenter numbers.When done with each field, press the ►button to move successively to the next field.You can also use the other arrow buttons tomove up, down, and back.Enter the IP Address, Subnet Mask, andGateway values.Press the ▼ button to go to DNS Mode.Press the ▼ button to go to the first DNSentry field. Enter the numbers as above.1.2.3.4.1.2.3.4.5.6.7.8.9.10.Press the ENTER button to select OK.The Network Status screen appears. Theproduct connects to the network after thenetwork connection is verified.Wireless NetworkYou can setup a wireless network three ways:Wireless (General)Using WPS(PBC).One Foot ConnectionWireless (General) includes both Automatic andManual setup procedures.Setting Up the Wireless Network Connection- AutoMost wireless networks have an optional securitysystem that requires devices that access thenetwork to transmit an encrypted security codecalled an Access or Security Key. The SecurityKey is based on a Pass Phrase, typically a wordor a series of letters and numbers of a specifiedlength you were asked to enter when you set upsecurity for your wireless network. If you use thismethod of setting up the network connection,and have a Security Key for your wirelessnetwork, you will have to enter the Pass Phraseduring the Auto setup process.Press the ▲▼ buttons to select Wireless(General).SettingsDisplayAudioNetworkSystemLanguageSecurityGeneralSupportNetwork Settings> Move " Enter ' ReturnWireless(general)One FootConnectionWPS(PBC)WiredSelect a network connection type.Set up wireless network by selecting your WirelessRouter. You may need to enter security key dependingon the setting of the Wireless Router.Press the ENTER button.When done, it displays a list of the availablenetworks.Press the ▲▼ buttons to select the desirednetwork, and then press the ENTER button.The Security screen appears.11.•••1.2.3.