Samsung HW-D7000 User Manual

Also see for HW-D7000: Firmware upgrade guide User manual

Contents

30 EnglishConnectionsVideo Conversion Flow According to the Connected PortAs shown in the illustration, if the unit’s HDMI Out is connected to a TV or monitor, the analog video source(composite or component) from the video device is processed for up-conversion automatically for HDMI output.If connected to a TV or monitor through Composite or Component ports, corresponding analog signal will beoutput respectively, without any conversion. In case if the unit and video source device is connected in multiplemethods (Component and Composite video) at the same time: Video input signal is automatically selected in theorder of Component Video Composite Video.NOTEThis enables upconverting up to a quality of 1080p.Auto conversion is not applied to a video source incoming from HDMI IN port.The maximum resolution of the input video signal is 480i, and it will not support higher input resolution.Video conversion is compatible with the NTSC color system only.✎HDMI 1(SAT)ARC(MONITOR) (GAME)HDMI 2(AUX1)HDMI 3(AUX2)HDMI 4HDMI INHDMI OUTiPodLANVIDEO IN COMPONENT IN/OUTVIDEO OUTSAT GAME TV 1(SAT)2(GAME)MONITORAUDIO IN IN OUTSAT GAME TV CDYP B/C BPR /C ROPTICAL 1(SAT)OPTICAL 2(GAME)OPTICAL 3(TV)COAXIAL(CD)SUBWOOFEROUTFRONT FRONTSURROUND SURROUNDCENTERSPEAKERS OUTSURROUND BACK/FRONT HEIGHTSURROUND BACK/FRONT HEIGHTFM ANTSPEAKER IMPEDANCE : 4~8HDMI INCOMPONENT INVIDEO INHDMI IN HDMI OUTCOMPONENT INVIDEO INHDMI OUTCOMPONENT OUTVIDEO OUTCOMPONENT OUTVIDEO OUTVideoConversionInputSignalOutputSignal