092 The Delete function deletes unprotected images premanently.Before you run the Delete function, store all important shotson a computer. The Startup image is stored in the camera’sinternal memory (i.e., not on the memory card). When you runthe Delete function, the camera will not delete it, even if youdelete all the files in the memory.Protecting imagesUse this function to protect specific shots from being accidentallyerased (Lock) and unprotect images that you have previously protected(Unlock).1. Press the Up / Down button and selectthe [Protect] menu tab. And then pressthe Right button.2. Press the Up/Down button to select adesired sub-menu, and then press theOK button.If you chose [Select], a thumbnailscreen appears.- Use Up/Down/Left/Right to select animage.- Press the OK button to protect animage or remove protection from animage. When you protect an image, akey appears on the image. When youunprotect, the key is removed.- Press the Fn button to save yourchanges.File Options ( )If you chose [All], the Protect All windowappears. Select [Lock] to protect allimages. Select [Unlock] to removeprotection from all images. Press OK tocomplete the process.- If you protect an image, the protect iconis displayed on the LCD screen. (Anunprotected image has no indicator)- Locked images are protected from thedelete function or [Delete] function, butare NOT protected from the [Format]function. You can apply image protecion in playback mode by selecting animage, and then pressing the image protection button. ( )Select Set1 31211 5Back SetProtectFace List Edit :Edit RankingRecycle Bin :OffVoice memo :OffDeleteDPOFCopy to CardProtect All?LockUnlockBack SetProtectFace List EditVoice memo :OffDPOFDeleteCopy to CardSelectAll