Samsung L200 User Manual

Also see for EC-L200ZBBA: Specification

Contents

Samsung L200 User Manual Manual pdf 17 page image

16Instructions on how to use the memory cardBe sure to format the memory card (see p.73) if you are using a newlypurchased memory card for the first time, if it contains data that thecamera cannot recognise, or if it contains images captured with a differentcamera.Turn off the camera power whenever the memory card is being insertedor removed.Repeated use of the memory card will eventually reduce the memorycard’s performance. Should this be the case, you will need to purchase anew memory card. Wear and tear on the memory card is not covered bythe Samsung warranty.The memory card is an electronic precision device.Do not bend, drop or subject the memory card to any heavy impact.Do not store the memory card in an environment with strong electronic ormagnetic fields, e.g. near loud speakers or TV receivers.Please do not use or store in an environment where there are extremes intemperature.Do not allow the memory card to become dirty or to come into contact withany liquid. Should this happen, clean the memory card with a soft cloth.Please keep the memory card in its case when not in use.During and after periods of extended use, you may notice that the memorycard is warm. This is perfectly normal.Do not use a memory card that is used in another digital camera. Touse the memory card in this camera, format the memory card using thiscamera.Do not use a memory card formatted by another digital camera or memorycard reader.xxxxxxxxxxxIf the memory card is subjected to any of the following, the recorded datamay become corrupted :- When the memory card is used incorrectly.- If the power is switched off or the memory card is removed whilerecording, deleting (formatting) or reading.Samsung cannot be held responsible for lost data.It is advisable to copy important data onto other media as back-up e.g.floppy disks, hard disks, CD etc.If there is insufficient memory available :A [Memory Full!] message will appear and the camera will not operate.To optimise the amount of memory in the camera, replace the memorycard or delete unnecessary images stored on the memory card.xxxxDon’t remove the memory card when the camera status lamp isblinking as this may cause damage to data in the memory card.x