Samsung L200 User Manual

Also see for EC-L200ZBBA: Specification

Contents

Samsung L200 User Manual Manual pdf 74 page image

73Quick viewIf you enable Quick View before capturing an image, you can view the imageyou just captured on the LCD monitor for the duration set in the [Quick View]setup. Quick view is possible only with still images.- Sub menus[Off] : The quick view functioncan’t be activated.[0.5, 1, 3 sec] : The captured image isbriefly displayed during theselected time.Formatting a memoryThis is used for formatting the memory. If you run [Format] on the memory, allimages, including the protected images, will be deleted. Be sure to downloadimportant images to your PC before formatting the memory.- Sub menus[No] : The memory will not be formatted.[Yes] : A window is displayed to confirm theselection. Select the [Yes] menu. A[Processing!] message appears andthe memory will be formatted. If yourun FORMAT in Play mode, a [NoImage!] message will appear.Be sure to run [Format] on the following types of memory card.- A new memory card, or an unformatted memory card- A memory card that has a file this camera can’t recognise or one thathas been taken from another camera.- Always format the memory card using this camera. If you insert amemory card that has been formatted using other cameras, memorycard readers, or PCs, you will get a [Card Error!] message.LCD saveIf you set the [LCD save] to On and the camera isn’t operated during thespecified time, the LCD monitor will be turned off automatically.- Sub menus[Off] : The LCD monitor will not be turnedoff.[On] : If the camera isn’t operated duringthe specified time (about 30 SEC.),the camera power will be idle(Camera status lamp:Blinking)automatically.K You can’t set the [LCD save] menu of Playback Mode.SETTINGS ()DISPLAY ( )Off1sec3sec0.5secBack SetDISPLAYLanguageDate & TimeStart ImageLCD BrightQuick ViewLCD SaveBack SetYesNoSETTINGSResetFormatFilePower OffVideo OutImprintBack SetOnOffLanguageDate & TimeStart ImageLCD BrightQuick ViewLCD SaveDISPLAY