76Selecting Video out typeThe Movie output signal from the camera can be NTSC or PAL.Your choice of output will be governed by the type of device (monitor or TV,etc.) to which the camera is connected. PAL mode can support only BDGHI.Connecting to an external monitorWhen the camera is connected to an externalmonitor, the image and menus on the LCDmonitor will be visible on the external monitorand the LCD monitor of the camera.- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.- PAL : Australia, Austria, Belgium, China, Denmark, Finland,Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand,Singapore, Spain, Sweden, Switzerland, Thailand, Norway.- When using a TV as an external monitor, you will need to select theexternal or AV channel of the TV.- There will be a digital noise on the external monitor, but it is not amalfunction.- If the image is not in the centre of the screen, use the TV controls tocentre it.- When the camera is connected to an external monitor, some parts of theimage may not be displayed.SETTINGS ()Yellow - VideoWhite - SoundBack SetNTSCPALSETTINGSResetFormatFilePower OffVideo OutImprint
