103Screen Adjustment44 Screen Adjustment3 Press the or button to move the picture up or down.4 Press the [ ] button.5 Select Close by pressing the and buttons sequentially. To reset the picture position, pressReset.To use the Position function after selecting Screen Fit in HDMI (1080i/1080p) or Component(1080i/1080p) or Custom, follow these steps.1 Press the button to select Position.2 Press the [ ] button.3 Press the / / / button to move the picture.4 Press the [ ] button.5 Select Close by pressing the and buttons sequentially.If you want to reset the picture to its original position, select Reset in the Position screen. Thepicture will be set to its default position.4.3.3 PC Screen AdjustmentAvailable in PC mode only.Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, usethe Coarse function to adjust the frequency as best as possible (Coarse) and Fine-tune again. After thenoise has been reduced, re-adjust the picture so that it is aligned with the center of screen.Position: To adjust the PC’s screen position if it is not centered or does not fit the product screen. Pressthe or button to adjust the Vertical Position. Press the or button to adjust the HorizontalPosition.Image Reset: Resets the image to the default settings.4.3.4 Resolution SelectIf the picture is not normal even when the resolution of the graphics card is one of the following, you canoptimize the picture quality by selecting the same resolution for the product as the PC using this menu.Available resolutions: Off / 1024 x 768 / 1280 x 768 / 1360 x 768 / 1366 x 768The Resolution Select option is only enabled when the input source is PC.4.4 Auto AdjustmentMENU Picture Auto Adjustment ENTERO mDownloaded From TV-Manual.com Manuals
