168MagicInfo Lite1010 MagicInfo Lite10.2 Network Schedule10.2.1 Connecting to a serverTo use the MagicInfo Lite Server, the clock on the monitor must be set through the server (web).To use local schedules and AutoPlay only, without using the MagicInfo Lite Server, the clock must beset using the remote control.Network setupTo run MagicInfo Lite, connect to a network.Refer to 130 page for details about the Network Settings menu.Server setupGo to MENU Network MagicInfo Lite Settings Server. Next, enter the server information.(E.g.: http://192.168.0.10:7001/MagicInfo/)Configuring the FTP mode and default storage space Default Storage: Specify the location you want to save content (downloaded from the server) to. Internal Memory: Save the content to the internal memory of the product. USB memory: Save the content to USB memory.If a network schedule is running when USB memory is not connected, the default content will run.MagicInfo LiteServerServer AddressPortAccess Periodically192.168.0.107001Apply CancelDownloaded From TV-Manual.com Manuals
