61Connecting and Using a Source Device22 Connecting and Using a Source Device2.5 Connecting the network boxFor details on how to connect to a network box, refer to the user's manual provided with the networkbox upon purchase.2.5.1 MagicInfoTo use MagicInfo, a network box (sold separately) must be connected to the product. To change the MagicInfo settings, run "MagicinfoSetupWizard" on the desktop. For details on how to use MagicInfo, refer to the DVD provided with the network box. The information in this section is subject to change without notice for quality improvement. If a problem occurs after installing an operating system other than the one provided with thenetwork box, restoring the previous version of the operating system, or installing software that isnot compatible with the operating system provided, you will not be able to benefit from technicalsupport and will be charged a fee for a visit from a service technician. A product exchange orrefund will also not be available.Entering MagicInfo mode1 After installing and connecting the network box (sold separately) to the product, power on theproduct.2 Press SOURCE on the remote control, and select MagicInfo.Connecting the network box to the HDMI port on the product will change Source from HDMI toMagicInfo.Downloaded From TV-Manual.com Manuals
