Samsung ML ML-2510 User Manual

Contents

Installing Printer Software in Windows10Changing the SoftwareLanguageAfter installation of the software, you can change the displaylanguage.1 Click the Windows Start menu.2 Select Programs or All Programs and then your printerdriver name.3 Select Language Selection.4 Select the desired language from the language selectionwindow, and click OK.Reinstalling Printer SoftwareYou can reinstall the software if installation fails.1 Start Windows.2 From the Start menu select Programs or All Programs→ your printer driver name → Maintenance.3 Select Repair and click Next.4 The list of printers available on the network appears.Select the printer you want to install from the list and thenclick Next.• If you do not see your printer on the list, click Update torefresh the list, or select Add TCP/IP Port to add yourprinter to the network. To add the printer to thenetwork, enter the port name and the IP address for theprinter.• To find a shared network printer (UNC Path), selectShared Printer [UNC] and enter the shared namemanually or find a shared printer by clicking the Browsebutton.You will see a component list so that you can reinstall anyitem individually.N OTE: If your printer is not already connected to thecomputer, the following window will appear.• After connecting the printer, click Next.• If you don’t want to connect the printer at this time, clickNext, and No on the following screen. Then the installationwill start and a test page will not be printed at the end of theinstallation.• The reinstallation window that appears in this User’sGuide may differ depending on the printer andinterface in use.5 Select the components you want to reinstall and clickNext.If you installed the printer software for local printingand you select your printer driver name, the windowasking you to print a test page appears. Do as follows:a. To print a test page, select the check box and clickNext.b. If the test page prints out correctly, click Yes.If it doesn’t, click No to reprint it.6 When the reinstallation is done, click Finish.