Samsung ML ML-2510 User Manual

Contents

Using Your Printer in Linux30Classes TabThe Classes tab shows a list of available printer classes.• Refresh : Renews the classes list.• Add Class... : Allows you to add a new printer class.• Remove Class : Removes the selected printer class.Ports ConfigurationIn this window, you can view the list of available ports, checkthe status of each port and release a port that is stalled in busystate when its owner is terminated for any reason.• Refresh : Renews the available ports list.• Release port : Releases the selected port.Shows the status of theclass and the number ofprinters in the class.Shows all of theprinter classes.Switches toportsconfiguration.Shows the port type,device connected tothe port and statusShows all of theavailable ports.Configuring Printer PropertiesUsing the properties window provided by the Printersconfiguration, you can change the various properties for yourmachine as a printer.1 Open the Unified Driver Configurator.If necessary, switch to Printers configuration.2 Select your machine on the available printers list and clickProperties.3 The Printer Properties window opens.The following five tabs display at the top of the window:•General: allows you to change the printer location andname. The name entered in this tab displays on theprinter list in Printers configuration.•Connection: allows you to view or select another port. Ifyou change the printer port from USB to parallel or viceversa while in use, you must re-configure the printer portin this tab.•Driver: allows you to view or select another printerdriver. By clicking Options, you can set the defaultdevice options.•Jobs: shows the list of print jobs. Click Cancel job tocancel the selected job and select the Show completedjobs check box to see previous jobs on the job list.•Classes: shows the class that your printer is in. ClickAdd to Class to add your printer to a specific class orclick Remove from Class to remove the printer from theselected class.4 Click OK to apply the changes and close the PrinterProperties Window.