1543 Enter the password with the keypadand press the Enter button.Reenter the password and press theEnter button.You can use up to 7 alphanumericcharacters for a password but youcannot use special characters.The ← key on the keypad performsthe role of Delete and the ◄ buttonperforms the role of the Cancel (Esc)function.To enter a number, press NumLock and then enter the number.If you do not press Num Lock, thecharacters of the correspondingkeys are entered instead of digits.4 When a message confirming thepassword configuration appears inthe [Setup Notice] window, press<Enter>.The supervisor password has beenset. The supervisor password isrequired to turn the computer on or toenter System Setup.Setting a User PasswordUsers can start the system with a userpassword, but cannot enter the SystemSetup. By doing this, you can preventother users from entering Setup.Before configuring a user password, asupervisor password must have beenconfigured. Deactivating the supervisorpassword also deactivates the userpassword.In the Set User Password item, press<Enter> and complete the procedures ofStep 3 of Setting a Supervisor Password.Activating the Booting PasswordBefore activating the booting password,a supervisor password must have beenconfigured.Set the Password on boot option toEnabled. From now on, system bootingwill not proceed without the password.
