201Q When I connect a projector, and change the settings to display the screenimage on both the LCD and the projector by pressing the MENU button, thescreen is not displayed properly.A Press the MENU button and press the button to the right of the LCD/CRT button toswitch to LCD+CRT Clone.The screen may not be displayed or only part of the screen may be displayed whenthe LCD resolution is too low or too wide and the projector cannot support theresolution. In this case, right-click over the Desktop, select Personal Settings >Display Settings (Y), set the resolution to 800 x 600 pixels and then try again.Q The shortcut icons are not displayed on the screen even if I press theshortcut key.A The shortcut icons only appear when the Easy Display Manager program isinstalled.Q I have connected a monitor (or projector) to the computer, but the colors onthe monitor are abnormally displayed.A Check if the monitor and computer are properly connected with the signal cableand reconnect the cable if necessary.Q The picture on the screen trembles.A The picture on the screen may tremble when you view some Internet pages or playsome on-line games. In this case, using an external monitor is recommended.
