Samsung NX-828 Technical Manual

Also see for NX-828: User guide

Contents

Action Display1. Press AUTO RDL and dial 80 COM1:9600 8 NONE2. Press LINE1,LINE2 to select the serial port(COM1, COM2)3. Press RDL or CONF to select the parameteryou wantCOM1:4800 8 NONEMMC 80 I/O PARAMETERDescription:Provides a mean of setting parameters for the serial I/O ports (COM1 and COM2) to work with SMDR and Remote MMC. COM1 and COM2 may be found onthe SMDR/R-MMC card. COM1 is the SMDR port and COM2 is R-MMC port onthe card. COM1 is used as SMDR or TRAFFIC port and COM2 is used forremote programming.PARAMETER OPTIONSTYPE OF SERVICE SMDR, REMOTE, TRAFFICREMOTE STN REMOTE onlyBAUD RATE 300, 600, 1200, 2400, 4800, 9600 BPSCHARACTER LENGTH 7 BIT, 8 BITPARITY NO PARITY, EVEN PARITY, ODD PARITYSTOP BIT 1 BITNX-828 HYBRID KEY SYSTEM PROGRAMMING4. Press MUTE/DND or MSG to select the data COM1:4800 7 ODD5. Press AUTO RDL to save and exitDEFAULT DATACOM1 : 9600 8 NONECOM2 : 9600 8 NONECOM1 : XON OFF : ONCOM2 : XON OFF : ONSMDR : COM1TRAFFIC : COM1REMOTE : COM2 STN : NONENOTE : 'XON OFF' means whether the system checks the CTS pin of the serial port.'REMOTE STN' means the port displaying the Remote MMC procedure. When remoteprogramming is in progress, it is not possible to access this port.RELATED MMCNONE