Samsung NX-828 Technical Manual

Also see for NX-828: User guide

Contents

MMC 17 STATION SPEED DIALDescription:Used to program the personal dial locations assigned to a station. Each stationmay have up to 20 locations numbered 00-19. Each dial number consists of atrunk or trunk group access code followed by a separator and up to 30 digits tobe dialled. If you dial a valid trunk or trunk group access number, it willautomatically insert the separator (:).Action Display1. Press AUTO RDL and dial 17 201: STN SPD:2. Using LINE1 or LINE2, select the station you want(e.g. 202)202: STN SPD:3. Press RDL or CONF to select the entry. 17:9:4602831ORDial the entry number(e.g.17)If the data is longer than 13 digits, pressALM/SD to verify the data.Display shows the entry moving left one digit4. Enter station Number or telephone number or trunkaccess code(e.g.9) followed by the number to bedialed(e.g. 1234567)17:9:1234567NX-828 HYBRID KEY SYSTEM PROGRAMMINGORPress HOLD to clear an entryIf you want to make a digit invisible, press MUTEthen digit then MUTE again (e.g. 9 + 123[MUTE]4[MUTE]567). The digit (4 in this example) will bedisplayed '¢À'.1 7 :9 :1 2 3 ¢À5 6 75. Press AUTO RDL to save and exitDEFAULT DATANONERELATED MMCNONE