134Wireless networkUsing Auto Backup to send photos or videosYou can send photos or videos that you captured with the camera to a PCwirelessly.Installing the program for Auto Backup onyour PC1 Install i-Launcher on the PC. (p. 161)2 Connect the camera to the PC with the USB cable.3 When the Auto Backup program icon appears, click it.• The Auto Backup program is installed on the PC. Follow the on-screen instructions to complete the installation.4 Remove the USB cable.Before installing the program, ensure that the PC is connected to a network.Sending photos or videos to a PC1 On the Mode screen, select Wi-Fi.2 Select .• If the pop-up message that prompts you to download theapplication appears, select Next.• The camera will automatically attempt to connect to a WLAN viathe most recently connected AP device.• If the camera has not previously been connected to a WLAN, it willsearch for available AP devices. (p. 118)3 Select a backup PC.
