138Wireless network > Sending photos or videos via emailChanging the email password1 On the Mode screen, select Wi-Fi.2 Select .• The camera will automatically attempt to connect to a WLAN viathe most recently connected AP device.• If the camera has not previously been connected to a WLAN, it willsearch for available AP devices. (p. 118)3 Press [m].4 Select Change Password.5 Enter your current 4-digit password.6 Enter a new 4-digit password.7 Enter the new password again.8 When the pop-up appears, select OK.Sending photos or videos via emailYou can send photos or videos stored on the camera via email. Forinformation about entering text, refer to "Entering text". (p. 122)1 On the Mode screen, select Wi-Fi.2 Select .3 Connect to a WLAN. (p. 118)4 Select the Sender box, enter your email address, and thentouch Done.• If you have previously saved your information, it will be insertedautomatically. (p. 136)• To use an address from the list of previous senders, select ĺan address.
