107* Default valueDisplaySelectAuto Select*: Convert between Main Display and EVF by eye sensorMain Display: The screen will be shown only through Main DisplayEVF: The screen will be shown only through EVFSensorCleaningSensor Cleaning: Removes the dust of sensor when executing this menuStart Up Action: If set, the dust of sensor is removed whenever turning on the power. (On, Off*)Because this product uses interchangeable lenses, the sensor can get dust on it when you change lenses.This can lead to dust particles appearing in the pictures you take. We recommend that you do not changelenses when you are in a particularly dusty area. Also, make sure to attach the lens cap to the lens when notusing it.Video OutSelect the video output signal appropriate for your country when connecting the camera to anexternal video device such as a monitor or TV.NTSC* : US, Canada, Japan, Korea, Taiwan, Mexico, etc.PAL (supporting only the BDGHI method) : Australia, Austria, Belgium, China, Holland, Finland,Germany, England, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,Thailand, Norway, etc.Anynet+(HDMI-CEC)When you connect the camera to an HDTV that supports Anynet+ (HDMI-CEC), you can control theplay function of the camera with the TV remote controller (p. 90).On* : You can control the play function of camera with the TV remote controller.Off : You can NOT control the play function of camera with the TV remote controller.Camera settings menuNormal setup 3( 3 )
