64 Users ManualConfiguring the PasswordSetting the Supervisor PasswordBy configuring a supervisor password, you can restrict system access to authorizedusers only.To use a fingerprint in the fingerprint sensor installed model, refer to thesupplied manual for the fingerprint sensor.1. Select the Security menu in the System Setup. To enter System Setup, see “StartingSystem Setup” on page 61.2. On the Set Supervisor Password item, press .3. Enter a password, press , re-enter the password for confirmation, andpress again.4. When a message confirming the password configuration appears in the [SetupNotice] window, press .Setting the User PasswordYou can configure user passwords so that other users can use the system.Before configuring a user password, a supervisor password must have beenconfigured.Users can start the system with their user password, but cannot enter into theSystem Setup.Deactivating the supervisor password also deactivates the user password.On the Set User Password item, press , and complete step 3-4 of "Setting theSupervisor Password".
