80 Users ManualInstalling a Memory ModuleHandle a memory module carefully. Hold them only by the edges.To install a memory module:1. Turn the computer over so that the bottom faces up.2. Using a screwdriver, remove the screw that holds the memory-modulecompartment door in place.3. Grasp the edge of the door and pull the door off the chassis.Memory Module Precautions:When removing the module, pull on the plastic portion of the connector slotstabs only. Do not pull on the metal part of the tabs, this may damage the tabs.4. Remove the installed module if necessary.a. Pull the tabs on the connector slot outward slightly, until the edge of thememory module pops up.b. Hold the memory module by the edges and pull it forward out of thecompartment.Screw 3aba connector slot tab
